 |
|
Follett Upright Single Door Laboratory & Pharmacy Refrigerators
Click model number and Options tabs for detailed pricing.
|
|
|
|
Base Price: $5,459 - $6,408 (depends on model)
From the leader in medical‑grade undercounter refrigerators and freezers – high performance upright refrigerators designed specifically for healthcare. From back plenum air ducts that ensure consistent, cabinet-wide cooling, to a feature rich, intuitive alarming and display interface, Follett ® upright refrigerators take the worry out of critical product storage, allowing your staff to focus on the job at hand.
Easy-to-read interface provides alarming, monitoring and user-selectable features
- 3" (8 cm) LCD display with 0.1C resolution continuously displays product temperature
- Audible and visual alarms
- High and low temperature
- Power failure
- Door ajar
- Probe error
- Low backup battery
- Alarm mute with ring back
- User selectable/programmable features
- High and low alarm set points
- Alarm volume
- Audible alarm mute
- Backup battery status
- Minimum and maximum temperature log
- Probe calibration to 0.1C accuracy
- Bottom temperature display (when optional bottom probe supplied)
- Password protection
- Date and time
Multiple interfaces for remote alarming and monitoring
- RS-485 port streams temperature, alarm and system performance data to central monitoring
- Dry contacts (NO and NC) allow remote alarming to other areas in the facility
- Left side access port provides easy probe entry for third-party monitoring systems
Advanced air distribution design delivers superior temperature consistency
Follett upright refrigerators feature the industry's most advanced airflow design. Our exclusive back plenums deliver cold air to six levels, ensuring consistent temperature of all product, even with heavily loaded shelves or baskets.
- Eliminates the need to carefully load product to allow air circulation
- Increases true storage by eliminating hanging evaporator designs
- Holds better than ±1C temperature at all levels in the cabinet
Powerful top mounted refrigeration module provides the performance required for your critical product
- ¹⁄³ hp hermetically sealed compressor, wide‑fin condenser and heavy-duty fan provide quick temperature pull down and rapid recovery following door openings
- Environmentally-friendly, non-CFC R-134a refrigerant delivers high efficiency ratings and supports LEED EA Credit 4
- Adjustable refrigeration system controls via front interface
- Compressor cut-in/cut-out
- Refrigeration cycle
- Door heater power cycle ? No defrost cycle - Follett's off‑cycle design keeps coils frost free, resulting in less system complexity and no heating elements that can compromise product temperatures
Outstanding serviceability
Follett's innovative single module design allows the entire refrigeration system to be removed as one unit without cutting refrigerant lines. If needed, a spare system can slide into place, virtually eliminating downtime. Routine vacuuming of the condenser face can be done from the front of the refrigerator.
Full stainless steel cabinet and high quality components designed with the user in mind
- Stainless steel exterior, interior and interior hardware resist scratches and rust experienced with powder‑coated surfaces
- 29.75" (76 cm) width and 79.5" (202 cm) height (with casters) allow easy entry through standard doors
- Industry-leading 2.75" (7 cm) thick foam insulation saves energy and reduces system run time
- Dished stainless floor contains spills for easy clean up
- Heavy-duty dual wheel locking casters roll easily
- Snap-off front and removable side panels allow quick and complete access to refrigeration module
- Backup batteries accessible behind hinged panel door
- RTD stainless top probe with quick‑disconnect panel jack
- Easy-to-reach top front bottle for convenient alarm checking
Heavy-duty glass doors provide ease of use and important energy savings
- Right-hinged (left optional), full view locking doors with ADA-compliant full length handle
- Energy-efficient, dual-pane glass with low-E coating reduces energy loss by 30 - 50%
- Superior glass pack design remains condensation free to 26 C (80 F) 60% RH, making heated doors unnecessary for most applications (heated doors available as option)
- Magnetic gasket holds door securely closed and snaps into molded track for easy replacement
- Self closing door locks open at 90 degrees to allow easy product loading
- Inset hinges allow positioning next to walls or other equipment without opening interference
The industry's best lighting solution features energy-efficient, cool LEDs
- Instant-on LEDs eliminate delay of fluorescent bulbs
- Full length light bars illuminate all shelves or baskets
- LEDs consume less energy and provide longer life (50,000 hour rating) than fluorescents
- Nil heat LEDs allow product placement next to lights for increased storage capacity
- Auto-on lighting with door opening and ON/OFF front panel switch
Choice of superior storage options
- 4 heavy-duty epoxy-coated shelves, adjustable in ½" (1 cm) increments are standard on "LB models"
- Industry-exclusive "floating" basket system on "PH models"
- 6 full extension, epoxy-coated "floating" baskets move with a gentle push or pull
- Shielded stainless bearings and stainless S-track design eliminate binding and uneven wear found with loose bearing systems
- Baskets and slide assemblies lift out without tools for full cleaning access
|
|
|
|
|
|
|
|
|
|
Standard Features
- Operating range: Factory preset at 4 C (39 F), Range of 2 - 8 C (36 - 46 F)
- Door: Dual pane, low-E glass, condensation free to 26 C (80 F) air/60% RH
- Door handle: ADA-compliant, full length handle with integral lock
- Interior/exterior material: Heavy-duty, corrosion resistant stainless steel
- Display: 3" (8 cm) LCD temperature display with 0.1C resolution
- Alarms: High/low temperature, power failure, door ajar, low battery, probe error
- Monitoring: RS-485 port, NO/NC contacts for remote monitoring, alarming
- Casters: (4) dual-wheel swiveling casters with toe locks
- Insulation: Energy-saving 2.75" (7 cm) thick, CFC-free foam insulation throughout
- Lighting: (2) energy-efficient full length LED lights
- Refrigeration system: Single top mounted module with1/3 hp air cooled compressor, non-CFC R134a refrigerant
- Air circulation system: Ducted air through 12 back plenum openings with front face return
- Temperature probe: Stainless steel RTD top, immersible, with quick-disconnect panel jack (bottom probe)
- Electrical: 115 volt, 60 Hz, 8.7 amps, maximum branch circuit breaker or fuse 15 amps
- Voltage range: 103-132V
|
|
|
|
|
|
|
|
|
|
REF20-LB Pricing & Specifications
- Base Price: $5,459
- Normal capacity: 19.7 cu ft (558 L)
- Storage system: (4) epoxy-coated shelves
- Exterior width: 29.75" (76 cm)
- Exterior depth: 29" (74 cm)
- Exterior depth with handles: 30.5" (78 cm)
- Exterior height with casters: 79.5" (202 cm)
- Interior dimensions (W x D x H): 24" x 22.5" x 56" (61 cm x 58 cm x 143 cm)
- Crated weight: 395 lbs (180 kg)
- Max. heat rejection: 950 BTU/hr
- Avg. energy consumption: 4.8 kWh/day
|
|
|
|
|
|
|
|
|
|
REF25-LB Pricing & Specifications
- Base Price: $5,764
- Normal capacity: 24.6 cu ft (697 L)
- Storage system: (4) epoxy-coated shelves
- Exterior width: 29.75" (76 cm)
- Exterior depth: 35" (89 cm)
- Exterior depth with handles: 36.5" (93 cm)
- Exterior height with casters: 79.5" (202 cm)
- Interior dimensions (W x D x H): 24" x 28.5" x 56" (61 cm x 73 cm x 143 cm)
- Crated weight: 430 lbs (196 kg)
- Max. heat rejection: 1050 BTU/hr
- Avg. energy consumption: 4.8 kWh/day
|
|
|
|
|
|
|
|
|
|
REF20-PH Pricing & Specifications
- Base Price: $5,973
- Normal capacity: 19.7 cu ft (558 L)
- Storage system: (6) epoxy-coated baskets
- Exterior width: 29.75" (76 cm)
- Exterior depth: 29" (74 cm)
- Exterior depth with handles: 30.5" (78 cm)
- Exterior height with casters: 79.5" (202 cm)
- Interior dimensions (W x D x H): 24" x 22.5" x 56" (61 cm x 58 cm x 143 cm)
- Crated weight: 460 lbs (209 kg)
- Max. heat rejection: 950 BTU/hr
- Avg. energy consumption: 4.8 kWh/day
|
|
|
|
|
|
|
|
|
|
REF25-PH Pricing & Specifications
- Base Price: $6,408
- Normal capacity: 24.6 cu ft (697 L)
- Storage system: (6) epoxy-coated baskets
- Exterior width: 29.75" (76 cm)
- Exterior depth: 35" (89 cm)
- Exterior depth with handles: 36.5" (93 cm)
- Exterior height with casters: 79.5" (202 cm)
- Interior dimensions (W x D x H): 24" x 28.5" x 56" (61 cm x 73 cm x 143 cm)
- Crated weight: 500 lbs (227 kg)
- Max. heat rejection: 1050 BTU/hr
- Avg. energy consumption: 4.8 kWh/day
|
|
|
|
|
|
|
|
|
|
Options & Accessories
- Integral 6" (15 cm), 7- day chart recorder — $982
- Heated door — $237
- Left hinged door (left hand door) — $185
- NIST-traceable probes — $164
- Pyxis*-compatible door brackets — $133
for compatibility with automated medication dispensing systems
- Additional shelves (LB models only) — $111
- Replacement chart pens — $46
- Replacement chart paper — $39
*Pyxis ® is a registered trademark of Cardinal Health in the United States and other countries.
|
|
|
|
|
|
|
|
|
Click photos below for a larger view
|
|